NEC Aspila Topaz Programming Manual page 227

IN
SA
SB
Description
Use Program 24-02 : System Options for Transfer to define the system options for Transfer feature.
Input Data
Prog. No.
24-02-01
Busy Transfer
Use this option to prevent or allow extensions to
Transfer calls to busy extensions.
24-02-02 MOH or Ringback on Transferred Calls
Use this option to enable or disable MOH on
Transfer. If enabled (0), a transferred caller hears
MOH while their call rings the destination extension.
If disabled (1), a transferred caller hears ringback
while their call rings the destination extension.
24-02-03
Delayed Call Forwarding Time
If activated at an extension, Delayed Call Forwarding
occurs after this interval. This also sets how long a
Transferred call waits at an extension
forwarded to Voice Mail before routing to the called
extension's mailbox.
24-02-04
Transfer Recall Time
An unanswered transferred call recalls to the
extension that initially transferred it after this
interval.
24-02-05 Message Wait Ring Interval Timer
For SLTs without message waiting lamps, this timer
determines the amount of time between intermittent
ringing. If this timer is set to '0' then the system rings
once.
24-02-07 Forced release timer for Trunk-to-Trunk Transfer
24-02-08
Delayed transfer timer for all extension groups
Conditions
None
Feature Cross Reference
Transfer
Program 24: Hold/Transfer Setup
24-02: System Options for Transfer
Item
219
Input Data
Default
0
0 : Disable
1 : Enable
0
0 : Hold Tone
1 : Ring Back
Tone
10
0-64800(Sec.)
30
0-64800(Sec.)
30
0-64800(Sec.)
0-64800(Sec.) 1800
10
0-64800(Sec.)
Programming Manual
Related
Program
11-11-28
11-11-29
15-07-59