Disassembly - JLG 1850SJ Service And Maintenance Manual

SECTION 3 - CHASSIS & TURNTABLE

Disassembly

1. Remove plugs (5) and pour lubricant in a container.
Reinstall plugs.
2. Remove six screws (56), motor flange(55), and O-Ring
(54). Do not damage O-Ring.
3. Remove two screws (2), cover (3), and pin (4).
4
3
2
3-14
55
54
56
4. Remove, Ring (1), Cover (6), O-Ring (7), Spacer (8) and
O-Ring (10). Do not damage O-Rings. Check and remove
Gasket (4) if damaged.
10
6
1
8
7
4
5. Remove Pinion (11), Gear Reduction Assembly (13), and
Gear Reduction Assembly (16).
16
13
11
18
3121619