JLG 1850SJ Service And Maintenance Manual page 449

6.2 MACHINE PERSONALITY SETTINGS AND
FUNCTION SPEEDS
PARAMETER
SUBMENU
(DISPLAYED ON
(DISPLAYED ON ANALYZER 2
ANALYZER 1ST LINE)
DRIVE: ACCEL X.Xs
DECEL X.Xs
MIN forward XX%
MAX forward XXX%
MIN reverse XX%
MAX reverse XXX%
ELEV. MAX XX%
CREEP MAX XX%
STEER: MAX SPEED XXX%
MAIN LIFT: ACCEL X.Xs
DECEL X.Xs
MIN UP XX%
MAX UP XX%
CREEP UP XX%
MIN DOWN XX%
MAX DOWN XXX%
CREEP DOWN XX%
3121619
Table 6-4. Machine Personality Settings and Function Speeds
ND
LINE)
Displays/adjusts drive acceleration
Displays/adjusts drive deceleration
Displays/adjusts minimum forward drive speed 0 to 35%
Displays/adjusts maximum forward drive speed 0 to 100%
Displays/adjusts minimum reverse drive speed 0 to 35%
Displays/adjusts maximum reverse drive speed 0 to 100%
Displays/adjusts maximum drive speed
NOTE: used when elevation cutout switches are
limiting maximum speed
Displays/adjusts maximum drive speed
NOTE: used when creep switch on pump pot is
active
Displays/adjusts maximum steer speed.
Displays/adjusts main lift acceleration
Displays/adjusts main lift deceleration
Displays/adjusts minimum main lift up speed
Displays/adjusts maximum main lift up speed
Displays/adjusts maximum main lift up speed
NOTE: used when creep switch on pump pot is
active
Displays/adjusts minimum main lift down
speed
Displays/adjusts maximum main lift down
speed
Displays/adjusts maximum main lift down
speed
NOTE: Personality settings can be adjusted within the adjustment
range in order to achieve optimum machine performance.
DESCRIPTION RANGE
0.1 to 5.0 sec
0.1 to 3.0 sec
0 to 50%
0 to 50%
0 to 100%
0.1 to 5.0 sec
0.1 to 3.0 sec
0 to 60%
0 to 100%
0 to 65%
0 to 60%
0 to 100%
0 to 75%
SECTION 6 - JLG CONTROL SYSTEM
DEFAULT TIME RANGE
VALUES
2
1.3
1
100 54-58 (see orientation)
1
100
25 110-112 (see orientation)
35 79-87 (see orientation)
100
1
1
20
80 130-160 (see orientation)
50
10
60 145-175 (see orientation)
45
(SEC)
6-17