Assembly Instructions For Bulkhead (Bh) Fittings - JLG 1850SJ Service And Maintenance Manual

Hide thumbs Also See for 1850SJ:

Table of Contents

Assembly Instructions for Bulkhead (BH) Fittings

1. Ensure threads and surface are free of rust, weld and

brazing splatter, splits, burrs or other foreign material. If

necessary replace fitting or adapter.

2. Remove the locknut from the bulkhead assembly.

3. Insert the bulkhead side of the fitting into the panel or

bulkhead bracket opening.

4. Hand thread the locknut onto the bulkhead end of the

fitting body.

5. Torque nut onto fitting per Table 5-10 and Table 5-11

while using the Double Wrench Method.

SECTION 5 - BASIC HYDRAULIC INFORMATION & HYDRAULIC SCHEMATICS