Jib Level Up And Down Crackpoints - JLG 1850SJ Service And Maintenance Manual

SECTION 6 - JLG CONTROL SYSTEM
12. This completes the Platform Level Down crackpoint pro-
cedure. Press ESC
menu.
13. The crackpoint setting procedure for Platform Level Up
and Down is complete. Press ESC
tions.
14. Push in Power/Emergency stop switch to save the cali-
bration changes.

Jib Level Up and Down Crackpoints

NOTE: To set crackpoints for the Jib Level Up and Down, a JLG
analyzer is needed. Have an assistant on hand to help ver-
ify that movement occurs.
1. Connect the JLG analyzer to the machine at the Ground
Controls. Start the engine.
6-82
to return to the calibrations
to exit calibra-
2. Scroll to MENU: OPERATOR ACCESS and press ENTER
.
3. Enter code 33271 and press ENTER .
3121619