Stowed Jib Shimming Procedure - JLG 1850SJ Service And Maintenance Manual

SECTION 4 - BOOM & PLATFORM

Stowed Jib Shimming Procedure

1. Rotate the jib to the appropriate position as shown
below.
4-56
Figure 4-35. Jib Stow Shimming Measurements
2. Insert a shim between the wear pad and pivot pad
mount.
3. Add shims as required to fill the gap between the wear
pad and the edge of the side plate of the jib rotator.
4. Shim until the distance between the jib and the side of
the base boom reaches the dimension shown in Figure
4-35., Jib Stow Shimming Measurements.
3121619