JLG 1850SJ Service And Maintenance Manual page 525

NOTE: Have an assistant help verify that movement occurs.
11. At the Ground Controls, press
and hold the Telescope In
toggle switch until the func-
tion starts moving, then
press ENTER
the Telescope In toggle
switch.
3121619
. Release
SECTION 6 - JLG CONTROL SYSTEM
12. The crackpoint setting procedure for Main Telescope
Out and In is complete. Press ESC
tions.
13. Push in Power/Emergency Stop switch to save the cali-
bration changes.
to exit calibra-
6-93