Amp Connector; Assembly - JLG 1850SJ Service And Maintenance Manual

Hide thumbs Also See for 1850SJ:

Table of Contents

7.4 AMP CONNECTOR

Check to be sure the wedge lock is in the open, or as-shipped,

position (See Figure 7-7.). Proceed as follows:

Figure 7-7. Connector Assembly Figure 1

1. To insert a contact, push it straight into the appropriate

circuit cavity as far as it will go (See Figure 7-9.).

SECTION 7 - BASIC ELECTRICAL INFORMATION & ELECTRICAL SCHEMATICS

Figure 7-8. AMP Connector

2. Pull back on the contact wire with a force of 1 or 2 lbs. to

be sure the retention fingers are holding the contact

(See Figure 7-9.).