Boom Recovery Mode
Boom Recovery Mode allows the boom to be lifted down and
telescoped in, in the event CAN bus communication is lost to
both the Jib Control Module and the Platform Module.
Boom Recovery Override is only available in the event the
ground module loses CAN communication with both the Jib
Control Module and the Platform module, in the case of a sev-
ered boom cable for example. This mode allows the boom to
be lifted down and telescoped in.
Boom Recovery override is accessible in Access Level 1. Using
the Left
and Right
shown below is reached.
3121619
arrow keys until the screen
SECTION 4 - BOOM & PLATFORM
Press ENTER
, the screen should read:
To enable the override mode 58237 must be entered as the
code. When the code is entered, the screen will show:
4-5