Swash Plate & Servo Piston; Servo Piston - JLG 1850SJ Service And Maintenance Manual

.
35
35. Inner Snap Ring
36. Snap Ring
Figure 3-24. Shaft & Front Bearing
20. Remove inner snap ring (35) and shaft/bearing assembly.
21. Remove snap-ring (36) retaining shaft front bearing. Pull
bearing (37) off shaft (38).
3121619
36
37
38
37. Bearing
38. Shaft
SECTION 3 - CHASSIS & TURNTABLE
Lift Here
43
39. Swashplate

40. Servo Piston

41. Piston Seal
Figure 3-25. Swash Plate & Servo Piston
22. Turn housing over and remove swashplate (39) by lifting
on end opposite servo lever.
23. Remove servo piston (40). Remove piston seal (41) and
O-ring (42) from servo piston. Discard seal and O-ring.
24. Remove journal bearings (43) from housing. Note loca-
tion and orientation of each bearing for reassembly.
39
40
42
41
42. O-ring
43. Journal Bearings
3-29