Assembly Instructions For Bulkhead (Bh) Fittings - JLG E450A Service And Maintenance Manual

Hide thumbs Also See for E450A:

Table of Contents

SECTION 5 - BASIC HYDRAULIC INFORMATION & SCHEMATICS

Assembly Instructions for Bulkhead (BH) Fittings

1. Ensure threads and surface are free of rust, weld and

brazing splatter, splits, burrs or other foreign material. If

necessary replace fitting or adapter.

2. Remove the locknut from the bulkhead assembly.

3. Insert the bulkhead side of the fitting into the panel or

bulkhead bracket opening.

4. Hand thread the locknut onto the bulkhead end of the

fitting body.

5. Torque nut onto fitting per Table 5-10, Bulkhead Fittings

(BH) - INCH and Table 5-11, Bulkhead Fittings (BH) -

METRIC while using the Double Wrench Method.

M450a M450aj E450aj