Opening An Existing Project - Avery Dennison Label Printer User Manual

Opening an Existing Project

There are three ways to open a previously saved project. All three methods take you to the
Open dialog box.
• From the Welcome Screen, select Open an Existing Project.
• From the Design screen, select File > Open or press Ctrl+O on the keyboard.
• From the Design screen, click Open on the Standard toolbar.
The Open Dialog Box
Look in - Locate and select the previously saved DesignPro project on your computer. If
opening a LabelPro project, change the Files of type selection first.
Preview - Displays a preview of the selected file. A preview is displayed only if the file was
previously saved with a corresponding preview graphic in the Save As dialog box.
Files of type - If you are opening a project created by one of the following programs, change
the file type accordingly. For instance, select LabelPro 2.0 - 3.02 (*.lpd) if opening an
® ®
Avery LabelPro project. You can open and reuse files from the listed Avery software.
However, it is not possible to save files in these formats.
The following file formats are supported by DesignPro:
• DesignPro (*.zdp)
• LabelPro 2.0 - 3.02 (*.lpd)
• WinLabel 3.0 (*.zwl)
®
Avery Personal Label Printer 79