Portserver Commands; Admin; Boot - Digi PortServer/8 User Manual

PortServer Commands

These commands are specific to the PortServer.

admin

Syntax:
admin
The admin command allows you root privileges with the PortServer if you have previously
logged in as other than root. You will be asked for the root password.

boot

Syntax:
boot action=
The boot command is used to reboot the PortServer, and requires root privileges.
If the command is entered as boot action=reset , the PortServer is reset using the current
parameters stored in memory (as when first powered on).
Use boot action=eewrite to reboot the PortServer using the factory default settings stored in
ROM. Note that in this event all user configuration will be lost!
See page 43 for Remote Booting via TFTP (Trivial File Transfer Protocol) of up-
graded PortServer software.
reset|eewrite
PortServer Terminal Server Ÿ Page 31