Configure the Connect IT 16/48
5. Specify the NTP servers used to synchronize the time on the Connect IT.
a. Expand the NTP servers section.
b. In the Server field, enter the name of the NTP server that is used to synchronize
c. If you want to enter an additional NTP server, click Add to add a new row and enter
6. Click Save or Apply.
View Connect IT status information
In the Status page in the local web user interface, you can view status information about the Connect
IT, cellular modem, network connections, tunnels, and the equipment connected to the serial ports.
The Status page displays by default when you open the local web user interface.
1.
Log in to the Connect IT local web user
2. Click Status in the left pane.
3. Click the desired tab to display status information.
Device Details: Displays status information about the Connect IT.
n
Cellular Details: Displays status information about the cellular modem, cellular
n
network connection, and the SIM cards.
Networks: Displays status information about the network interfaces and network
n
devices.
Tunnels: Displays status information about open tunnels.
n
Serial: Displays information about the status of the serial ports.
n
Download an archive of the supported MIBs
You can download a .zip archive of the MIBs supported by this device.
1.
Log in to the Connect IT local web user
2. Select the System tab in the left pane.
3. Scroll down to the SNMP MIBs section.
4. Click Download MIBs. The .zip archive file is downloaded to your downloads folder.
Download a support report file
You can download a support report file for the Connect IT and include it with support requests.
1.
Log in to the Connect IT local web user
2. Select the System tab in the left pane.
3. Scroll down to the Support Report section.
4. Click Download report. The file is downloaded to your downloads folder.
Digi Connect IT® 16/48 User Guide
the time. The syntax is: {hostname|UPv4_address|IPv6_address}
the NTP server name.
View Connect IT status information
interface.
interface.
interface.
47