Important Safety Information; Where To Find Information - Digi ConnectPort LTS Series User Manual

About this guide

Important safety information

To avoid contact with electrical current:

Where to find information

In addition to this guide, you can find additional product and feature information in these documents:
RealPort® Installation Guide
n
For product support resources visit the following support pages:
For additional information, see the following resources:
Online help and tutorials in the
n
Digi Python Wiki
n
Digi ConnectPort LTS User Guide
Never install electrical wiring during an electrical storm.
n
Never install an Ethernet connection in wet locations unless that connector is
n
specifically designed for wet locations.
Use caution when installing or modifying lines.
n
Use a screwdriver and other tools with insulated handles.
n
Wear safety glasses or goggles.
n
Do not place Ethernet wiring or connections in any conduit, outlet or junction box
n
containing electrical wiring.
Installation of inside wire may bring you close to electrical wire, conduit,
n
terminals and other electrical facilities. Extreme caution must be used to avoid
electrical shock from such facilities. Avoid contact with all such facilities.
Ethernet wiring must be at least 6 feet from bare power wiring or lightning rods
n
and associated wires, and at least 6 inches from other wire (antenna wires,
doorbell wires, wires from transformers to neon signs), steam or hot water pipes,
and heating ducts.
Do not place an Ethernet connection where it would allow a person to use an
n
Ethernet device while in a bathtub, shower, swimming pool, or similar hazardous
location.
Protectors and grounding wire placed by the service provider must not be
n
connected to, removed, or modified by the customer.
Do not touch uninsulated Ethernet wiring if lightning is likely.
n
External wiring: Any external communications wiring installed needs to be
n
constructed to all relevant electrical codes. In the United States this is the
National Electrical Code Article 800. Contact a licensed electrician for details.
web interface
Important safety information
for the Digi device
10