Table of Contents
Advertisement
Configure the Connect IT Mini
5. Configure an external TACACS+ server. This allows access to services on this Connect IT to be
authenticated externally, which is useful for central management of users.
Note
This step is required only if you chose the TACACS+ option in
Expand each sub-section and complete the fields in each of the sections. To display information
about what you should enter in each field, click the down arrow and then Help next to each
field.
6. Click Save or Apply.
Configure idle timeout
You can configure the length of time after which users are disconnected from services. If you do not
enter a value, the idle timeouts feature is disabled, and the user will not be disconnected from
services.
1.
Log in
to manage the Connect IT.
2.
Access the Configuration > Authentication
3. In the Idle timeout field, enter the length of time after which users are disconnected from
services. Leave this field blank to disable this feature.
Syntax: number{w|d|h|m|s}
4. Click Save or Apply.
Update modem firmware from the local web user interface
You can update the modem firmware on the Connect IT. Before you begin, you must download the
desired version of the modem firmware onto your PC.
1.
Download the Connect IT firmware to your
2.
Log in to the Connect IT local web user
3. Select the System tab in the left pane.
4. Scroll down to the Modem Firmware section.
5. Click Choose File.
6. Browse for and select the modem firmware file downloaded to your PC.
7. Click Upload & Install Firmware.
Configure Remote Power Management
The remote power management feature allows you control outlets on a power controller using serial
or network interfaces. As you manage a device which is connected to a serial port on the Connect IT,
you can also control the power outlets you have associated with that serial port.
Follow this process to configure a power controller and an access control group for power
management:
1.
Configure the Connect IT to connect to a power controller
2.
Create an access control group for power management and assign to users
Digi Connect IT® Mini User Guide
screen.
PC.
interface.
Configure idle timeout
Step
4.
19
Advertisement
Table of Contents
