Mounting An Expansion Unit - Fuji Electric MICREX-SX series SPF User Manual

Section 4 Installation and Wiring

(3) Mounting an expansion unit

Expansion units connected to the main unit can be mounted without gaps.
24V OUT
+ 400mA S/S
TX
G
RX
T N
+
TX
G
RX
IN AC100~240V
L N
T N
C0
NA0LA-RS5
<How to connect an expansion right side unit>
1) Remove the connector cover of the expansion connector (right side) of the main unit or that of the expansion connector (OUT)
of the expansion unit that is mounted on the left of the expansion right side unit to be connected.
2) Connect the expansion cable connector equipped with the expansion right side unit to be connected to the expansion
connector described in the step 1).
3) After the connector is connected, store the remaining cable inside the connector housing of the unit on the left side.
4) Attach the connector cover removed in the step 1).
X0 X2 X4 X6 X8 X10 X12
S/S
X1 X3 X5 X7 X9 X11 X12
0 I 2 3
4 5 6 7
8 9 I0 II
I2 I3
IN (X)
PWR/
BAT
RUN/
MEM
ALM
OUT (Y)
0 I 2 3
4 5 6 7
8 9
AC100 240V
Y1 Y2 Y4 Y5 Y6 Y8
C0 Y0 C2 Y3 C4 C4 Y7 Y9
<How to connect a healthy unit>
1) Remove the connector cover of the expansion connector (OUT) of the rightmost expansion right side unit.
2) Mount a healthy unit to the expansion connector described in the step 1).
(The connector cover removed in the step 1) is not used.)
X0 X2 X4 X6 X8 X10 X12 X14 X16 X18
X1 X3 X5 X7 X9 X11 X13 X15 X17 X19
IN (X)
PWR/
BAT
RUN/
MEM
ALM
OUT (Y)
PORT0
Y1 Y2 Y4 Y5 Y6 Y8 Y10 Y12
C12 Y13
Y0 C2 Y3 C4 C6 Y7 C8 Y9 Y11
Expansion
connector
Store the remaining
expansion cable here.
X20 X22
C0 Y1 C2 C4 Y5 Y7
X21 X23 Y0 Y2 Y3 Y4 Y6
NA0E16T-0
Y14
Y8 Y10 Y11 Y12 Y14
Y15 C8 Y9 C10 C12 Y13 Y15
Expansion right side unit
24V IN O0+ O1+
AG O0- O1-
I0+ I1+ I2+ I3+
I0- I1- I2- I3-
Expansion cable
connector
4-9
24V IN O0+ O1+ 24V IN O0+ O1+
AG O0- O1- AG O0- O1-
NA0AW06-MR NA0AW06-MR
I0+ I1+ I2+ I3+ I0+ I1+ I2+ I3+
I0- I1- I2- I3- I0- I1- I2- I3-