Connection Of Cable For Safety Signals - ABB IRBP Product Manual

3 Installation and commissioning

3.7.3 Connection of cable for safety signals

3.7.3 Connection of cable for safety signals
Safety signals
Connect the cable to the terminal in the control equipment for safety and the
terminal in the SCC or DCC control module.
1
2
Continues on next page
136
Action
Add a cable gland to the
separable panel for the
control equipment for safety
(SAFETY SIGNALS) (1).
Connect the cable to con-
nector A13.X8 in the control
equipment for safety (2).
© Copyright 2010-2020 ABB. All rights reserved.
Illustration
xx0900001035
xx0900001036
Product manual - IRBP /D2009
3HAC037731-001 Revision: T