2.4 Operator panel
2.4.1 The FlexPendant
Introduction to the FlexPendant
The FlexPendant is a hand held operator unit that is used for many of the tasks
when operating a robot: running programs, jogging the manipulator, modifying
programs, and so on.
The FlexPendant is designed for continuous operation in harsh industrial
environment. Its touch screen is easy to clean and resistant to water, oil, and
accidental welding splashes.
The FlexPendant consists of both hardware and software and is a complete
computer in itself. It is connected to the robot controller by an integrated cable and
connector.
The hot plug button option makes it possible to disconnect the FlexPendant in
automatic mode and continue running without it.
Product manual - IRBP /D2009
3HAC037731-001 Revision: T
© Copyright 2010-2020 ABB. All rights reserved.
2 System description
2.4.1 The FlexPendant
Continues on next page
53