Cut The Paint Or Surface On The Robot Before Replacing Parts - ABB IRBP Product Manual

6.1.4 Cut the paint or surface on the robot before replacing parts

General
Follow the procedures in this section whenever breaking the paint of the robot
during replacement of parts.
Required equipment
Equipment
Cleaning agent
Knife
Lint free cloth
Touch up paint Standard/Foundry
Plus
Touch up paint Standard/Foundry
Plus
Removing
1
2
Product manual - IRBP /D2009
3HAC037731-001 Revision: T
6.1.4 Cut the paint or surface on the robot before replacing parts
Action
Cut the paint with a knife in the joint between
the part that will be removed and the struc-
ture, to avoid that the paint cracks.
Carefully grind the paint edge that is left on
the structure to a smooth surface.
© Copyright 2010-2020 ABB. All rights reserved.
Spare parts Note
Ethanol
3HAC067974-001 Graphite White
3HAC037052-001 ABB Orange
Description
xx0900000121
6 Repair
193