IDEC MICROSmart FC6A Series User Manual page 93

Input Delay Time
Maximum Allowed Steady Load
Isolation
Cable
Run/Stop Methods
Power on/off

WindLDR RUN/STOP command

Function switch operation

USB Port
Points
Communication Type
Communication Functions
Connector
Isolation between Internal Circuit
Available Function when FC6A is
Powered by USB
Ethernet Port
Points
Communication Type
Communication Speed
Port 1
Communication
Functions
Port 2
Connector
Cable
Maximum Cable Length
Isolation between Internal Circuit
SD Memory Card Slot
Points
Supported SD Card
File System
Function
Insertion/Removal Durability
Communication Connector
Cartridge Base Module
*1
Connection
*1
HMI Module Connection
*1 All devices that are connectable to the communication connector cannot be used in expanded ambient operating temperatures (-25 to -10°C
and 55 to 65°C). Do not connect these devices when the product is used in expanded ambient operating temperatures.
12 ms (including the software filter)
13 V
Not isolated
Unshielded cable 1 m (included with the product)
1
USB2.0 Full speed, CDC class
Capable of maintenance communication with a PC
USB mini-B
Not isolated
Downloading/uploading user programs, downloading system software, data file manager
2
(When the HMI module is connected, this can be expanded by 1 point with the Ethernet
port that has the web server function.)
IEEE 802.3 compliant
10BASE-T, 100BASE-TX
Maintenance communication server,
User communication server/client (TCP/UDP),
Modbus TCP server/client,
PING, SNTP, e-mail, web server, FTP server/client, BACnet/IP
Maintenance communication server,
User communication server/client (TCP/UDP),
Modbus TCP server/client,
PING, EtherNet/IP communication
RJ45 (Auto MDI/MDI-X compatible)
CAT 5 or higher, STP
100 m
Pulse transformer isolated
1
SD memory cards (max 2 GB), SDHC memory cards (max 32 GB)
FAT16, FAT32
Downloading/uploading user programs, saving log data,
recipes, downloading system software, saving web pages
2,000 times
1
No. of
(Two cartridges can be connected to the cartridge base module when it is connected to the
Modules
Plus CPU module.)
1
No. of
(One cartridge can be connected to the HMI module when it is connected to the Plus CPU
Modules
module.)
FC6A S MICROS
ERIES MART
Special internal relay (M8000) operation

Operation of stop input and reset input

U ' M FC9Y-B1722
SER S ANUAL
2: P S
RODUCT PECIFICATIONS
2-57