IDEC MICROSmart FC6A Series User Manual page 656

A
PPENDIX
Monitoring the FC6A Series MICROSmart Status
is displayed only when the Plus CPU module is connected.
Stop
External Memory
Device Monitor
Status Monitor
CPU Network Settings 3
Default Gateway:
192.168. 1. 3
CPU Network Settings 4
Preferred DNS Server:
192.168. 1.200
CPU Network Settings 11
Alternate DNS Server:
192.168. 2.201
CPU Network Settings 12
MAC Address:
FF-FF-FF-FF-FF-FF
Checking/clearing error information
Device Monitor
Program Monitor
Status Monitor
Error Status
Error!
PLC is stopped.
(Press and hold)
Press OK button for
more details.
Error!
PLC is running.
Press OK button for
more details.
A-20
System Version:
1.00
Run/Stop Status:
Running
When the FC6A Series MICROSmart is stopped: Stopped
CPU Network Settings 2
Subnet Mask:
255.255.254. 0
CPU Network Settings 5
Alternate DNS Server:
192.168. 1.201
CPU Network Settings 10
Preferred DNS Server:
192.168. 2.200
HMI Network Settings 1
Setting: Fixed
IP Address
192.168. 11. 6
HMI Network Settings 6
MAC Address:
FF-FF-FF-FF-FF-FF
General Error: 3
Execution Error: 0
Clear Error
General Error: 3
Execution Error: 0
Clear Error
FC6A S MICROS
ERIES MART
Scan Time:
Current: 2 ms
Maximum: 4 ms
Minimum: 2 ms
CPU Network Settings 1
Setting: Fixed
IP Address:
192.168. 1. 6
CPU Network Settings 6
MAC Address:
FF-FF-FF-FF-FF-FF
CPU Network Settings 9
Default Gateway:
192.168. 2. 3
HMI Network Settings 2
Subnet Mask
255.255.254. 0
HMI Network Settings 5
Alternate DNS Server:
192.168. 1.201
General Error: 3
Power failure
Watchdog Timer
U ' M FC9Y-B1722
SER S ANUAL
Protection Status:
Read Program:
Prohibited
Protection Status:
Write Program:
Password Protected
CPU Network Settings 7
Setting: Fixed
IP Address:
192.168. 2. 6
CPU Network Settings 8
Subnet Mask
255.255.254. 0
HMI Network Settings 3
Default Gateway:
192.168. 11. 3
HMI Network Settings 4
Preferred DNS Server:
192.168. 11.200