IDEC MICROSmart FC6A Series User Manual page 530

10: I/O C
ARTRIDGES
Plus CPU module
To use analog I/O cartridges with the Plus CPU module, connect a cartridge base module equipped with two cartridge slots to the
left side of the Plus CPU module. The Plus CPU module can be expanded with a maximum of four analog inputs or analog outputs
by connecting a maximum of two analog I/O cartridges.
Furthermore, the Plus CPU module can be expanded with a maximum of two analog inputs or analog outputs by connecting the
HMI module to the left side of the cartridge base module and connecting one analog I/O cartridge.
For example, when the cartridge base module is connected to the Plus CPU module and the HMI module is connected to the
cartridge base module, the Plus CPU module can be expanded with a maximum of six analog inputs or analog outputs by
connecting a maximum of three analog I/O cartridges.
Cartridge Slot 3
CPU Module
Plus CPU module
Select the analog I/O cartridges for the connected devices and configure the signal type.

Caution



10-8
Cartridge Slot 1
Always install or remove the analog I/O cartridges in the FC6A Series MICROSmart when the power is turned off. If an
analog I/O cartridge is installed or removed in the FC6A Series MICROSmart when the power is on, the product may be
damaged. There is also a risk that the analog I/O cartridge may not operate correctly.
The analog I/O cartridge may be damaged when dropped, so take great care not to drop it when removing it.
Correctly install the analog I/O cartridges in the analog I/O cartridge slots.
For details on how to install and remove the analog I/O cartridge, see "Assembling the HMI Module and a Cartridge"
on page 3-7 and "Assembling the Cartridge Base Module and a Cartridge" on page 3-8.
FC6A S MICROS
ERIES
Cartridge Slot 1
Cartridge Slot 2
Cartridge Base Module
Cartridge Slot 2
Yes
U ' M FC9Y-B1722
MART SER S ANUAL
HMI Module
Cartridge Slot 3
Yes Yes