IDEC MICROSmart FC6A Series User Manual page 87

(13) Input Terminals
These terminals connect input devices such as push buttons and limit switches. DC inputs are both sinks and sources.
(14) USB Port
A mini-B type USB 2.0 connector. A USB cable can be attached to the FC6A Series MICROSmart and connected to a PC to
download and upload user programs using WindLDR.
(15) Function Switch
This switch turns M8073 on or off (default setting: 0 (off)).
You can run or stop the CPU module with this switch by enabling Run/Stop PLC by Function Switch in WindLDR (default
setting: enabled).
For details about the function switch, see "Function Switch Configuration" on page 5-11.
(16) Power Supply Terminals
These terminals are used to supply 24V DC power to the CPU module.
(17) ACT LED
This LED flashes when sending or receiving data while the LINK LED (18) is on.
(18) LINK LED
This LED is on when a network-compatible device is connected to Ethernet port 2.
(19) Ethernet Port 2
This port allows Ethernet communication with connected devices that are equipped with an Ethernet interface.
(20) ACT LED
This LED flashes when sending or receiving data while the LINK LED (21) is on.
(21) LINK LED
This LED is on when a network-compatible device is connected to Ethernet port 1.
(22) Ethernet Port 1
This port allows Ethernet communication with connected devices that are equipped with an Ethernet interface.
(23) Analog Input
The connector for the analog input.
(24) Analog Potentiometer
A potentiometer for setting a timer or other device. This allows an analog value used in the user program to be set without
the use of an external device.
(25) Communication Connector
This connector is used to connect the HMI module and cartridge base module.
(26) Analog Port Cover
A removable cover that protects the analog input and analog potentiometer. When using these, remove the analog port
cover.
(27) SD Memory Card Cover
An openable cover that protects the SD memory card and function switch. Open the SD memory card cover when inserting
or ejecting the SD memory card or when using the function switch.
(28) Expansion Connector Protection Sticker
This sticker protects the expansion connector. Remove the expansion connector protection sticker when connecting an
expansion module.
(29) USB Port Cover
An openable cover that protects the USB port. When using the USB port, open the USB port cover.
(30) Power Supply Terminals Cover
An openable cover that protects the power supply terminals. Open the power supply terminals cover when removing and
attaching the power supply terminals.
Note: The FC6A-D16R4CEE, FC6A-D16K4CEE, FC6A-D16P4CEE, FC6A-D32K4CEE, and FC6A-D32P4CEE do not have a power supply terminal cover.
FC6A S MICROS U
ERIES MART
' M FC9Y-B1722
SER S ANUAL
2: P S
RODUCT PECIFICATIONS
2-51