Sd Memory Card Configuration Dialog Box - IDEC MICROSmart FC6A Series User Manual

11: SD M C
EMORY ARD

SD Memory Card Configuration Dialog Box

Use the SD Memory Card Configuration dialog box to configure the parameters required to create the autoexec.ini file, ZLD
file, and files for MQTT Basic Settings.
(1)
(1) button
Click this button and select the file to import.
Import autoexec.ini
Import mqtt_basic_settings.ini
Note: Import mqtt_basic_settings.ini is valid only if the Specify with SD memory card check box is selected on the MQTT Settings dialog
box.
■ General Tab
On the General tab, configure the settings to create the necessary folder and files for Action.
(2) Action
Download
This parameter can be set from the following three targets.
Target
ZLD Project
MQTT Basic Settings
All
Upload
Uploads the ZLD file from the CPU module.
For this setting, specify "upload" in "loading_direction" key under the [COMMON_SETTING] section in the autoexec.ini file.
11-22
(2)
(3)
(4)
(5)
: Restores the contents of the selected autoexec.ini file.
: Restores the contents of the selected mqtt_basic_settings.ini file.
Downloads a ZLD file to the CPU module.
For this setting, specify "download" in "loading_direction" key under the [COMMON_SETTING] section in the
autoexec.ini file.
Downloads files for MQTT Basic Settings to the CPU module.
Downloads a ZLD file and files for MQTT Basic Settings to the CPU module.
FC6A S MICROS
ERIES
Description
U ' M FC9Y-B1722
MART SER S ANUAL