IDEC MICROSmart FC6A Series User Manual page 567

Creating the autoexec.ini File
To download a ZLD file to the CPU module using an SD memory card, save an autoexec.ini file to the SD memory card.
Note: The autoexec.ini file is created according to the file format described in this section. By using WindLDR, the autoexec.ini file can be created
by configuring a dialog box and without needing to be aware of the file format. To create the autoexec.ini file using Notepad or another text
editor, type in the sections, keys, and parameters according to the file format and save the file as "autoexec.ini".
Creating the autoexec.ini File Using WindLDR
This section describes the operation procedure to create an autoexec.ini file using WindLDR.
● Operation procedure
On the Configuration tab, in the SD Card group, select Configuration.
1.
The SD Memory Card Configuration dialog box is displayed.
Click the General tab.
2.
Configure the contents and operation of the autoexec.ini file on this tab.
Under Action, select Download and select ZLD Project.
3.
Under ZLD Project, set the file name and creation method of the ZLD file to download.
4.
For the parameter settings, see "General Tab" on page 11-22 for the SD Memory Card Configuration dialog box.
Set the download options.
5.
For the parameter settings, see "General Tab" on page 11-22 for the SD Memory Card Configuration dialog box.
Set whether to save user web pages to SD memory card.
6.
FC6A S MICROS U
ERIES MART
' M FC9Y-B1722
SER S ANUAL
11: SD M C
EMORY ARD
11-31