IDEC MICROSmart FC6A Series User Manual page 554

11: SD M C
EMORY ARD
(6) Read Trigger (PLC to Recipe)
Sets the device that triggers batch reading device values and saving them to the SD memory card as a recipe file. This
parameter can be configured when SD Memory Card is selected under Access to and Read/Write or Read Only is
selected under Action.
(7) Write Trigger (Recipe to PLC)
Sets the device that triggers batch writing recipe values to devices by block.
This parameter can be configured when SD Memory Card or Internal Memory (ROM-User Program) is selected under
Access to and Read/Write or Write Only is selected under Action.
(8) Channel Settings
Configures the channels.
Channel : Displays the channel numbers.
Tag Name : Sets the tag name for the recipe value write destination device and the device value read source device and
the first device.
The set devices are continuously set starting from number 1 in the Data Settings Table in the Data Editor
dialog box.
Device Address : Displays the tag name set under Tag Name or the device address of the first device.
Data button : Click this button to display the Data Editor dialog box. The recipe data for the selected channel is
configured on this dialog box. For details, see "Data Editor dialog box" on page 11-19.
Channel Name : Enter the channel name.
File Name : Sets the CSV file names when batch saving device values to the SD memory card with read recipe.
When the File Name check box is cleared, the file names are the default RCPn (n: 5-digit sequential
number). When selected, the name can be entered.
Read Trigger : Displays the read trigger device for each channel. The triggers are automatically allocated starting from the
device set for Read Trigger (PLC to Recipe) (6).
Write Trigger : Displays the write trigger device for each channel. The triggers are automatically allocated starting from the
device set for Write Trigger (Recipe to PLC) (7).
(9) Auto Write Recipe Setting button
Click this button to display the Auto Write Settings dialog box. The execution timing and the range of blocks for the auto
write function are configured on this dialog box. For details, see "Auto Write Settings Dialog Box" on page 11-20.
(10) Duplicate Block button
Click this button to display the Duplicate Block dialog box. The settings of registered blocks can be copied to other blocks
or used to overwrite other blocks. For details, see "Duplicate Block dialog box" on page 11-21.
(11) Export Recipe File button
Saves all Recipe Editor settings in every channel to the SD memory card as a recipe file.
Click this button to display the Select Drive dialog box. Specify the SD memory card drive, then click OK.
Only channels with Access to set to SD memory card are saved.
11-18 FC6A S MICROS U
ERIES MART
' M FC9Y-B1722
SER S ANUAL