Analog I/O Module Parameter Settings - IDEC MICROSmart FC6A Series User Manual

9: A I/O M
NALOG ODULES

Analog I/O Module Parameter Settings

This section describes the analog I/O module parameter settings.
The parameter settings are configured for each channel. The parameters to configure differ according to the analog I/O module
type and I/O type. In Expansion Modules Configuration, configure the parameter settings according the application.
For detailed configuration methods, see "Module Configuration Editor" on page 12-1.
Analog Input Type
The following parameters are for configuring the analog inputs on the analog input modules and the mixed analog I/O modules.
Yes: Parameters, : No parameters
―
No. Parameter
(1) Signal Type
(2) Data Type
Minimum and
(3) maximum values
(Data type)
(4) Filter
(5) Sample Time
(6) Thermistor Settings
(7) Data
(8) Status
(4) (5)
9-4
FC6A-J2C1 FC6A-J4A1
FC6A-J2C4 FC6A-J4A4
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
― ―
Yes Yes
Yes Yes
(1)
FC6A S MICROS
ERIES
FC6A-J8A1 FC6A-J4CN1
FC6A-J8A4 FC6A-J4CN4
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
― ―
Yes Yes
Yes Yes
(2) (6)
U ' M FC9Y-B1722
MART SER S ANUAL
FC6A-J4CH1Y FC6A-J8CU1
FC6A-J4CH4Y FC6A-J8CU4
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
― Yes
Yes Yes
Yes Yes
(3)
FC6A-L06A1 FC6A-L03CN1
FC6A-L06A4 FC6A-L03CN4
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
― ―
Yes Yes
Yes Yes
(7) (8)