IDEC MICROSmart FC6A Series User Manual page 419

Bit Bit
15 14 13 12 11
D8727
Bit Bit
15 14 13 12 11
D8730
Bit Bit
15 14 13 12 11
D8733
0 (000): The DSR signal status is not used for FC6A Series MICROSmart transmission control.
Use this status when DSR signal control is not required.
1 (001): When the DSR signal is on, the FC6A Series MICROSmart can transmit and receive.
ON
DSR signal
OFF
Transmit/receive
2 (010): When the DSR signal is off, the FC6A Series MICROSmart can transmit and receive.
ON
DSR signal
OFF
Transmit/receive
3 (011): When the DSR signal is on, transmission is possible (reception is always possible).
ON
DSR signal
OFF
Transmit
This is normally called "busy control" and is used for transmission control for devices with a slow
processing speed such as printers.
(As viewed from the connected device, there is a limit on the data that can be input.)
4 (100): When the DSR signal is off, transmission is possible.
ON
DSR signal
OFF
Transmit
5 or higher: The operation is the same as the setting "000".
Bit Bit Bit
10 9 8 7 6 5 4
Bit Bit Bit
10 9 8 7 6 5 4
Bit Bit Bit
10 9 8 7 6 5 4
Not possible Possible
Not possible Possible
Not possible Possible
Not possible Possible
FC6A S MICROS
ERIES
Bit Bit
3 2 1 0
Port 22
Port 23
Port 24
Port 25
Bit Bit
3 2 1 0
Port 26
Port 27
Port 28
Port 29
Bit Bit
3 2 1 0
Port 30
Port 31
Port 32
Port 33
Not possible
Not possible
Not possible
Not possible
U ' M FC9Y-B1722
MART SER S ANUAL
6: D
EVICES
6-35