IDEC MICROSmart FC6A Series User Manual page 27

Allocations of the Communication Port Numbers
All-in-One CPU module, CAN J1939 All-in-One CPU module, and Plus CPU module support serial communication with the target
device. Serial communication is possible with built-in interface or expanded interface of each CPU module. Interfaces supporting
the serial communication are as follows:
All-in-One CPU module
CAN J1939 All-in-One CPU module
Plus CPU module
In order to use each interface as communication port, the communication parameters must be configured according to the
communication parameters of the target device. Configure the communication parameters in Communiction Ports tab in the
Function Area Settings dialog box. The allocation between each interface and communication port is described below.
For details on each setting, refer to chapter 3 "Communication Port Settings" in the "FC6A Series MICROSmart Communication
Manual".
■ Ports and Cartridge Slots 1 to 3 on the CPU Module and HMI Module
— : Not equipped with the CPU module.
No : Cannot be used as the serial communication ports.
CPU Module
16-I/O type
All-in-One CPU module 24-I/O type
40-I/O type
CAN J1939 All-in-One
40-I/O type
CPU module
Plus 16-I/O type
Plus CPU module
Plus 32-I/O type
*1 When the HMI module is connected to the CPU module and HMI-Ethernet port is added.
*2 When a communication cartridge is installed on the cartridge slot.
*3 When the cartridge base module is connected to the CPU module and a communication cartridge is installed on the cartridge slot.
*4 When the HMI module is connected to the CPU module and a communication cartridge is installed on the cartridge slot.
*5 The combination of "Data Bits: 7" and "Parity: None" is not possible.
Notes:
For the locations of each port and cartridge slot, see "Part Names and Functions" on page 2-4.

For serial port 1 wiring, see "Other Inputs and Ports" on page 2-47. For communication cartridge wiring, see "Terminal Arrangement and

Wiring Examples" on page 2-175.
■ Ports on Communication Modules
CPU Module
16-I/O type
All-in-One CPU module 24-I/O type
40-I/O type
CAN J1939 All-in-One
40-I/O type
CPU module
Plus 16-I/O type
Plus CPU module
Plus 32-I/O type
*1 Four or more communication modules cannot be connected to the All-in-One CPU module and CAN J1939 All-in-One CPU module.
: Serial port 1, cartridge slots 1 and 2, communication module ports
: Cartridge slots 1 and 2, communication module ports
: Cartridge slots 1 to 3, communication module ports
Serial USB Ethernet
Port 1 Port Port 1
Port 1
No No
—
1st
Port 4, 5 Port 6, 7
FC6A S MICROS U
ERIES MART
Port
HMI-
Ethernet CAN
Ehternet
Port 2 Port
Port
—
*1
No
No
Communication Module
2nd 3rd 4th
*1
Port 8, 9
Port 10, 11
' M FC9Y-B1722
SER S ANUAL
1: G I
ENERAL NFORMATION
Cartridge Slot
1 2
—
—
Port 2
*2*5
Port 3
*2*5
No
Port 1 Port 2 Port 3
—
*3*5 *3*5
··· 15th
*1 *1
··· Port 32, 33
3
—
*4*5
1-13