IDEC MICROSmart FC6A Series User Manual page 148

2: P S
RODUCT PECIFICATIONS
*2 The total input delay time increases in proportion to the number of channels used. Input channels that have been set to unused are not
included in the number of enabled input channels.
*3 The arbitrary setting is a function that uses the digital resolution data by scaling it to arbitrary data (that arbitrarily sets the lower limit value and
the upper limit value). The range setting (-32,768 to 32,767) is specified with data registers.
*4 Input data out of range is reflected in the status of the analog I/O module.
*5 For products with a version lower than 200, the maximum permanent allowed overload is 13V DC (when the voltage input is set) and 40mA DC
(when the current input is set). If a current of 160mA or higher (at an ambient temperature of 25°C) flows through the circuit, the protection
function for the input circuit starts operating and works to reduce the applied current. However, the circuit will be damaged if the applied
current is due to voltage applied at 30V DC or higher. For details on the version number of modules, see "Checking the Version Number" on
page 2-1.
2-112 FC6A S MICROS U
ERIES MART
' M FC9Y-B1722
SER S ANUAL