Start Windldr - IDEC MICROSmart FC6A Series User Manual

4: O
PERATION
Introduction
The following version of WindLDR is required for FC6A Series MICROSmart programming and maintenance:
• When you use All-in-One CPU module/CAN J1939 All-in-One CPU module: WindLDR version 8.0.0 or later
• When you use Plus CPU module: WindLDR version 8.6.0 or later
For details on how to check the version, see "Checking the WindLDR Version Number" on page 4-16.
This chapter describes basic procedures for operating WindLDR, programming and maintenance software for the FC6A Series
MICROSmart.

Start WindLDR

■ Windows 10
Click Start and then All Apps > IDEC Automation Organizer > WindLDR.
■ Windows 8
Click WindLDR in the tiles on the Start screen.
■ Windows 7
Click Start and then Programs > IDEC Automation Organizer > WindLDR.
B
ASICS
FC6A S MICROS U
ERIES MART
' M FC9Y-B1722
SER S ANUAL
4-1