IDEC MICROSmart FC6A Series User Manual page 456

7: HMI F
UNCTION
Changing the HMI module network settings
■ Changing the setting
On the standard screen, press the
1.
Stopped
2015/DEC/01/TUE
13:30:40
The system menu is displayed.
Select Configurations with the
2.
Run
Edit Program
External Memory
Configurations
Select Function with the
3.
Function
Clock
Menu Languages
Backlight
Select Communications with the
4.
Communications
Message Settings
5. Select HMI Network Settings with the
Slave Number
CPU Network Settings
HMI Network Settings
Select Setting with the
6.
HMI Network Settings
Setting: Fixed
IP Address
192.168. 0. 10
With the (up) and
7.
Setting:
Fixed
Data Register:
DHCP
Notes:
If you specify Data Register, the network settings cannot be configured because they are acquired from the data registers.

The current network settings can be checked from the status monitor.

7-22
(ESC) + (OK) buttons.
(up) and (down) buttons and press the
(up) and (down) buttons and press the
(up) and (down) buttons and press the
(up) and
(up) and (down) buttons and press the
(down) buttons, select ON or OFF.
FC6A S MICROS
ERIES
(OK) button.
(down) buttons and press the
(OK) button.
U ' M FC9Y-B1722
MART SER S ANUAL
(OK) button.
(OK) button.
(OK) button.