IDEC MICROSmart FC6A Series User Manual page 525

Digital Input and Output Assignments
The digital inputs or digital outputs are assigned as follows.
Input Device Range
Output Device Range
*1 As given below, certain digital I/O cartridges cannot be used in cartridge slot 3 depending on the configuration of expansion modules.
Limitations on Using Digital I/O Cartridges
Configuration of Expansion Modules
FC6A-N32B3×15
FC6A-T32K3 and FC6A-T32P3×15
Assignment Example
When a digital input cartridge is installed in Cartridge Slot 1 and a digital output cartridge is installed in Cartridge Slot 2 of a 40-
I/O type CPU module
Input Device Range
Output Device Range
Cartridge Slot 1
I630 to I633
Q630 to Q633
Digital I/O Cartridges That Cannot Be Used in Cartridge Slot 3
CPU Modules
40-I/O Type
I0 to I27
Q0 to Q27
FC6A S MICROS
ERIES MART
Digital I/O Cartridge
Cartridge Slot 2
I634 to I637
Q634 to Q637
FC6A-PN4
FC6A-PTK4, FC6A-PTS4
Digital I/O Cartridge
Cartridge Slot 1
I630 to I633
—
U ' M FC9Y-B1722
SER S ANUAL
10: I/O C
ARTRIDGES
Cartridge Slot 3
*1
I624 to I627 (All-in-One CPU
module/CAN J1939 All-in-One
CPU module)
I640 to I643 (Plus CPU module)
*1
Q624 to Q627 (All-in-One CPU
module/CAN J1939 All-in-One
CPU module)
Q640 to Q643 (Plus CPU module)
Cartridge Slot 2
—
Q634 to Q637
10-3