IDEC MICROSmart FC6A Series User Manual page 421

Bit
15
D8734
0 (00): The signal is on when the FC6A Series MICROSmart is set to run and off when stopped.
While running, the signal is always on regardless of transmitting or receiving data. Set this value when it is
necessary to indicate the run status.
DTR signal
OFF
1 (01): Always off.
2 (10): Set this value when performing flow control for received data. The signal is on when data from the
connected device can be received.
The signal is off when data cannot be received.
Receive
DTR signal
OFF
3 (11): The operation is the same as the setting "0".
■ D8120, D8121: HMI Module Information
HMI module type information is written to these registers.
The allocation of information (bit assignment) is as follows.
Bit
14 13 12
15
D8120
Status
D8121
Reserved
The system software version displays the version of the software written to the device.
For details on the type IDs and statuses, see "List of Type IDs and Status" on page 6-49.
■ D8122 to D8127: Cartridge Slot Information
Cartridge Slot 1 to 3 information is written to these registers.
The allocation of information (bit assignment) is as follows.
Bit Bit
15 15
D8122, D8124, D8126
D8123, D8125, D8127
D8122, D8123 = Cartridge Slot 1 Information
D8124, D8125 = Cartridge Slot 2 Information
D8126, D8127 = Cartridge Slot 3 Information
For details on the type IDs and statuses, see "List of Type IDs and Status" on page 6-49.
Bit Bit
8 7 6 5
Running Stopped
ON
Not possible Possible
ON
Bit Bit
11 10 9 6 5
8 7
System Software Version
Bit
14 13 12 11 10 9
8
Status
Reserved
FC6A S MICROS
ERIES
Bit
4 3 2 1 0
Port 30
Port 31
Port 32
Port 33
Running
Not possible
Bit
4 3 2 1
0
Type ID
Bit
6 5 4 3 2
7
Type ID
System Software Version
U ' M FC9Y-B1722
MART SER S ANUAL
Bit
1
0
6: D
EVICES
6-37