IDEC MICROSmart FC6A Series User Manual page 582

11: SD M C
EMORY ARD
■ D8255: SD Memory Card Download/Upload Execution Error Information
Status
0 Normal termination
1 No SD memory card is inserted.
2
3 Invalid SD memory card format.
4
5 The ZLD file name specified by src_file is invalid.
6 Failed to read the ZLD file saved to the SD memory card.
7 No ZLD file on the SD memory card.
8
No autoexec.ini file.

9
The autoexec.ini could not be read.

10 The program download is password protected
11
The ZLD file saved on the SD memory card has an invalid
12
file size.
The target model of the ZLD file saved on the SD memory
13
card is different.
14 Other download processing is being executed.
The download was not executed because the user
program written to the FC6A Series MICROSmart was the
15
same as the data in the ZLD file saved to the SD memory
card.
The download was not executed because the system
software and user program written to the FC6A Series
16
MICROSmart was the same as the data in the ZLD file
saved to the SD memory card.
*1 Double-byte characters and the single-byte characters
*2 When file data cannot be normally written or read due to the data in the file becoming corrupted or a failure of a specific area of the SD memory
card.
*3 Except when the password has been canceled using the HMI module.
Download files for MQTT Basic Settings
The special internal relays and the special data registers used to download the files for MQTT Basic Settings are as follows.
Note: R/W stands for read/write and allows reading and writing. R is read-only. W is write-only.
Special Internal Relay
Address
Download MQTT Basic Settings from
M8271
SD Memory Card Execution Flag
Download MQTT Basic Settings from
M8272 SD Memory Card Execution
Completion Output
Download MQTT Basic Settings from
M8273
SD Memory Card Error Output
11-46
Download
―
―
*1
―
*3
.
―
/ : , ; * ? " < > | cannot be used in the file name.
\
When M8271 is turned on, the files for MQTT Basic Settings are downloaded.
M8272 is turned off when downloading the files for MQTT Basic Settings is
started, and it is turned on once the download is finished.
M8273 is turned off when downloading the files for MQTT Basic Settings is
started. It is turned on if an error occurs during the process.
FC6A S MICROS
ERIES MART
Normal termination
No SD memory card is inserted.
The SD memory card is write protected.
Invalid SD memory card format.
The SD memory card is full and no folders or files can be
created.
The ZLD file name specified by dst_file is invalid.
*2
Failed to write the ZLD file to the SD memory card.
A program syntax error occurred and the ZLD file could
not be created.
No autoexec.ini file.

The autoexec.ini could not be read.

The program upload is password protected
The download was not executed because the system
software and user program written to the FC6A Series
MICROSmart was the same as the data in the ZLD file
saved to the SD memory card.
Description
U ' M FC9Y-B1722
SER S ANUAL
Upload
*1
*2
―
*3
.
―
―
―
―
―
M8255
OFF
ON
ON
ON
ON
OFF
OFF
ON
ON
ON
ON
―
ON
ON
ON
OFF
OFF
R/W
R/W
R
R