IDEC MICROSmart FC6A Series User Manual page 575

Creating the mqtt_basic_settings.ini File
To download the files for MQTT Basic Settings to the Plus CPU module using an SD memory card, save the mqtt_basic_settings.ini
and certificates (der format) to the SD memory card.
Note: The mqtt_basic_settings.ini file is created according to the file format described in this section. By using WindLDR, the
mqtt_basic_settings.ini file can be created by configuring a dialog box and without needing to be aware of the file format. To create the
mqtt_basic_settings.ini file using Notepad or another text editor, type in the sections, keys, and parameters according to the file format and
save the file as "mqtt_basic_settings.ini".
Creating the mqtt_basic_settings.ini File Using WindLDR
This section describes the procedure to create an mqtt_basic_settings.ini file using WindLDR.
● Operation procedure
On the MQTT Settings tab in the MQTT Settings dialog box, select the Enable MQTT and Specify with SD memory
1.
card check boxes.
Configure the other necessary settings, and then click OK.
2.
The MQTT Settings dialog box is closed.
On the Configuration tab, in the SD Card group, select Configuration.
3.
The SD Memory Card Configuration dialog box is displayed.
Under Action, select Download and select MQTT Basic Settings.
4.
Click the MQTT tab.
5.
Set the contents of the mqtt_basic_settings.ini file on this tab.
For the parameter settings, see "MQTT Tab" on page 11-25 for the SD Memory Card Configuration dialog box.
FC6A S MICROS U
ERIES MART
' M FC9Y-B1722
SER S ANUAL
11: SD M C
EMORY ARD
11-39