IDEC MICROSmart FC6A Series User Manual page 283

*1 Used when removing the wires.
*2 Push-in type.
Crimping Tool
The following crimping tool can be used with FC6A Series MICROSmart.
Tool Name
Crimping tool
Do not touch live terminals. There is a risk of electric shock.

Caution
When powered, the terminals that are connected to external devices may become hot. Do not touch the terminals

immediately after turning the power off.
Do not touch the power supply terminals immediately after turning the power off. There is a risk of electric shock.

Insert the wire all the way to the tip of the ferrule and crimp it.

When connecting stranded wire or multiple wires to a terminal block, use a ferrule. Otherwise there is a risk of wires

becoming disconnected.
When using single wires, you do not need to use ferrules.

Single wire assumes the use of one wire. Do not attach two or more wires to the one connector hole.

Phoenix Contact
CRIMPFOX 6 (1212034)
FC6A S MICROS U
ERIES MART
Model Number (Order Number)
PZ 6 Roto L (1444050000)
' M FC9Y-B1722
SER S ANUAL
3: I
NSTALLATION AND
Weidmüller
W
IRING
3-51