IDEC MICROSmart FC6A Series User Manual page 553

Recipe Function Parameters
This section describes the dialog box parameter settings required to use the recipe function.
Recipe Editor
Use Recipe Editor to collectively manage the save destination for recipe data, the devices for writing recipe values and reading
device values, and those execution conditions.
(2)
(3)
(4)
(5)
(8)
(9)
(1) Recipe Editor tab
Displayed as "Block Number Block Name".
Multiple tabs can be opened and switched between to edit settings.
(2) Block Number
Displays the block number of the block being edited.
The block number of the block being edited can be changed by selecting and changing the number in the list. A confirmation
message is displayed when the number is changed. Click OK. Already registered block numbers are not displayed in the list.
(3) Block Name
Enter the block name. The name entered here is displayed under Recipe on the Project Window.
(4) Access to
Select the save destination for recipe data that is used when the block is executed from the following four options. Internal
memory (ROM-Range 1) and internal memory (ROM-Range 2) can be set to only 1 block number each.
SD Memory Card

Internal Memory (ROM-User Program)

Internal Memory (ROM-Range 1)

Internal Memory (ROM-Range 2)

(5) Action Setting
Select the action that uses the recipe data as the following.
Read/Write : Saves batch read device values to the SD memory card as a recipe file and writes recipe values to devices. This
option can only be configured when SD Memory Card, Internal Memory (ROM-Range 1), or Internal
Memory (ROM-Range 2) is selected under Access to.
Read : Saves batch read device values to the SD memory card as a recipe file. This option can only be configured when
SD memory card is selected under Access to.
Write : Writes recipe values to devices.
(1)
(10)
FC6A S MICROS
ERIES
(6)
(7)
U ' M FC9Y-B1722
MART SER S ANUAL
11: SD M
EMORY
(11)
C
ARD
11-17