Switching Run/Stop - IDEC MICROSmart FC6A Series User Manual

Switching Run/Stop

This section describes how to run and stop the user program using the HMI module buttons.
Running the User Program
This section describes the steps to run the user program.
On the standard screen, press the
1.
Stopped
2015/DEC/01/TUE
13:30:40
The system menu is displayed.
Select Run and press the
2.
Run
Edit Program
External Memory
Configurations
↓
The user program is set to run.
Running
2015/DEC/01/TUE
13:30:40
When setting the user program to run by using the buttons on the HMI module, fully ensure the safety
Caution
before doing so.
Stopping the User Program
This section describes the steps to stop the user program.
1. On the standard screen, press the
Running
2015/DEC/01/TUE
13:30:40
The system menu is displayed.
Select Stop and press the
2.
Stop
External Memory
Device Monitor
Status Monitor
Select Yes with the
3.
Do you want to
stop PLC?
No
Yes
↓
The user program is set to stop.
Stopped
2015/DEC/01/TUE
13:30:40
(ESC) +
(OK) button.
(ESC) +
(OK) button.
(down) button and press the
FC6A S MICROS
ERIES
(OK) buttons.
(OK) buttons.
(OK) button.
U ' M FC9Y-B1722
MART SER S ANUAL
7: HMI F
UNCTION
7-9