Analog I/O Module Parameter Settings - IDEC MICROSmart FC6A Series User Manual

Hide thumbs Also See for MICROSmart FC6A Series:

Table of Contents

Analog I/O Module Parameter Settings

This section describes the analog I/O module parameter settings.

The parameter settings are configured for each channel. The parameters to configure differ according to the analog I/O module

type and I/O type. In Expansion Modules Configuration, configure the parameter settings according the application.

For detailed configuration methods, see "Module Configuration Editor" on page 12-1.

Analog Input Type

The following parameters are for configuring the analog inputs on the analog input modules and the mixed analog I/O modules.

Yes: Parameters,

: No parameters

(1) Signal Type

(2) Data Type

maximum values

(5) Sample Time

(6) Thermistor Settings