Start Windldr - IDEC MICROSmart FC6A Series User Manual

4: O
PERATION
Introduction
The following version of WindLDR is required for FC6A Series MICROSmart programming and maintenance:
• When you use All-in-One CPU module/CAN J1939 All-in-One CPU module: WindLDR version 8.0.0 or later
• When you use Plus CPU module: WindLDR version 8.6.0 or later
For details on how to check the version, see "Checking the WindLDR Version Number" on page 4-13.
This chapter describes basic procedures for operating WindLDR, programming and maintenance software for the FC6A Series
MICROSmart.

Start WindLDR

■ Windows 8
Click WindLDR in the tiles on the Start screen.
■ Windows 7, Windows Vista
Click Start and then Programs > Automation Organizer V2 > WindLDR > WindLDR.
■ Windows XP
From the Start menu of Windows, select Programs > Automation Organizer V2 > WindLDR > WindLDR.
WindLDR starts and a blank ladder editing screen appears with menus and tool bars shown on top of the screen.
B
ASICS
FC6A S MICROS U
ERIES MART
' M FC9Y-B1722
SER S ANUAL
4-1