Seats - Tracker Off-Road 800SX Service Manual

Seats

REMOVING/INSTALLING PASSENGER
SEAT BOTTOM
1. To remove the passenger seat bottom, raise the front
of the seat and unhook both of the "C" channels of
the seat bottom (B) out of the mounting pegs (A).
MOD248
2. Install the seat bottom by hooking both of the "C"
channels of the seat bottom into the mounting pegs
(A).
PASSENGER SEAT BACKREST
REMOVING
1. Unlatch the passenger seat backrest; then fold down.
Unhook both of the tubes of the seat backrest (A) out
of the "C" channels (B)
MOD121A
MOD226
54
DISASSEMBLING
1. Remove the six cap screws securing the passenger
seat backrest to the passenger seat backrest frame;
then remove the passenger seat backrest from the
passenger seat backrest frame.
MOD521
2. Remove the five flange nuts securing the passenger
seat backrest to the passenger seat backrest frame;
then remove the passenger seat backrest from the
passenger seat backrest frame.
MOD609
ASSEMBLING
1. Position the passenger seat backrest to the passenger
seat backrest frame; then install the six cap screws
securing the passenger seat backrest to the passenger
seat backrest frame. Tighten to 2 ft-lb (2.7 N-m).
MOD521
2. Position the center passenger seat back to the passen-
ger seat backrest frame; then install the five flange
nuts securing the center passenger seat back to the
passenger seat backrest frame. Tighten to 4 ft-lb (5.4
N-m).