Seat Base - Tracker Off-Road 800SX Service Manual

MOD282
4. Reinstall the passenger seat back hinge; then reinstall
the 11 cap screws securing the passenger seat back
hinge.
MOD280A
5. Reinstall the four cap screws and hose clamp for the
CVT air inlet snorkel.
MOD281
6. Reconnect the two electrical connectors to the ECU
(A).
58
MOD593
7. Reinstall the seats; then both side panels; then both rear
inner fenders.

Seat Base

REMOVING
1. Remove the seats; then remove the rear inner fenders
and side panels; then remove the behind-the-seat stor-
age box panel.
2. Remove the 12 cap screws securing the seat base; then
remove the seat base.
MOD285
INSTALLING
1. Position the seat base back into position; then secure
using 12 cap screws.
MOD285
2. Reinstall the behind-the-seat storage box panel; then
reinstall the side panels and rear inner fenders; then
reinstall the seats.