Tracker Off-Road 800SX Service Manual page 43

MOD607
7. With the fender removed from the vehicle, remove
the four cap screws on the inside of the fender; then
remove the fender flare from fender taking note of
the four tabs on the fender flare.
MODC065
MODC065A
INSTALLING
If installing fender flare, start at step 1. If installing
fender, start at step 2.
1. With the fender removed from the vehicle, install the
fender flare onto the fender taking note of the four
tabs on the fender flare; then install the four cap
screws to secure fender flare to fender.
MODC065A
MODC065
2. Place the fender into position; then install the two cap
screws on the top portion of the fender.
MOD150A
MOD607
3. Install the three cap screws indicated.
41