Tracker Off-Road 800SX Service Manual page 57

MOD609
INSTALLING
1. Install the seat backrest by hooking both of the tubes
of the seat backrest (A) into the "C" channels (B).
Fold up; then close the seat backrest latch.
MOD226
MOD165
DRIVER SEAT
REMOVING
1. Remove the six cap screws from underneath the
driver seat rails.
MOD227
2. Lift the seat adjustment lever; then move the seat
assembly toward the front of the vehicle to clear the
rear mounting channel.
MOD228
DISASSEMBLING
1. Remove the four cap screws securing the seat bottom
to the seat assembly; then remove the seat bottom
from the seat assembly.
MOD523
2. Remove the four cap screws securing the seat back-
rest to the seat assembly; then remove the seat back-
rest from the seat assembly.
55