Shift Cable - Tracker Off-Road 800SX Service Manual

MOD220

Shift Cable

REMOVING
NOTE: The shift cable can be accessed from the top

by removing the floor or from the bottom by remov-
ing the skid plate. Removing from the bottom in most
cases will be easier.
1. Remove the mid/upper dashboard; then remove the
skid plate; then remove the lower steering adjuster
cap screw. With a suitable strap secure the steering
wheel tilt assembly up and out of the way.
2. Remove the cap screw and lock nut securing the shift
cable to the shift lever. Discard lock nut. Inspect cap
screw and replace if damaged.
MOD304
3. Loosen the lock nut securing the shift cable (under-
neath the dashboard). Slide the shift lever to the front
of the vehicle and out.
 NOTE: The shift cable has two flat spots where the
threads are that must be toward the metal housing for
removal.
MOD309
MOD310
MOD303
4. Remove the E-clip securing the cable end to the shift
arm stud.
MOD298
5. Loosen the adjuster nut; then remove the shift cable
from the bracket. Remove any cable ties securing the
shift cable to the chassis noting their location; then
remove the shift cable.
33