Tracker Off-Road 800SX Service Manual page 157

MOD376
6. Remove the two cap screws securing the transaxle to
the engine. Account for the spacers.
MOD563
MOD554
7. Remove the two cap screws securing the starter to
the engine backplate; then use a suitable strap to sup-
port the starter; then remove the two cap screws
securing the engine backplate to the front engine
mount; then remove the four cap screws securing the
engine backplate; then remove the engine backplate.
MOD563A
MOD544
MOD544A
MOD565
8. Uncouple the driveshaft from the transaxle by gently
sliding the front differential with the driveshaft
toward the front of the vehicle. Account for the
O-rings and boot for the driveshaft-to-transaxle cou-
pler.
MOD564
155