Tracker Off-Road 800SX Service Manual page 168

TA062
4. Pinch the forks together and slide the rail into posi-
tion in the case.
TA063
5. Install the output gear. Use slight force to seat it and
ensure the gear teeth engage with the intermediate
shaft.
MOD384
6. Install the park pawl with dowel and spring.
TA074
166
TA065A
7. Install the shift drum gear onto the shift drum align-
ing the appropriate splines of the drum with the gear.
8. Install the shift shaft gear onto the shift shaft with the
timing marks facing up; then install into the case
with the gear aligning with the shift drum gear.
TA066A
 NOTE: Rotate the shift drum and the shift shaft to
ensure the timing marks are correctly aligned.
9. Install the star detent over the shift drum aligning the
appropriate splines of the detent with the shaft
splines and the dot facing up.
TA134A
10. Install an appropriate bearing seal protector tool onto
the output shaft.