Tracker Off-Road 800SX Service Manual page 171

MOD544A
5. Install the two cap screws with blue Loctite #243
securing the backplate to the front mount and tighten
to 51.7 ft-lb (70 N-m); then position the starter into
place and install the two cap screws securing the
starter to engine backplate; then tighten to 14.8 ft-lb
(20 N-m).
MOD544
MOD563A
6. Install the spacers for the transaxle to engine mount;
then install the two cap screws to secure the transaxle
to engine. Tighten to 75 ft-lb (102 N-m).
MOD554
MOD563
7. Connect the electrical connections to the transaxle.
Secure with nylon straps.
MOD376
MOD375
169